- 38 -
BEFORE START-UP
AUTO LUBE GREASE LINE PRE-FILLING
It is
mandatory
that the supply line from the Auto Lube main pump to the connection on
the hammer is primed with grease before it is used.
Failure
to do this will result in no
grease being administered to the hammer tool for a period of time. This can and will
result in severe galling of the tool and tool bushing.
PRIMING THE GREASE LINE
1. Place the hammer in a vertical position,
applying enough down force to push
the tool up into the hammer.
2. Turn the machine off.
3. Make sure there is a full grease cartridge installed in the Auto Lube assembly. Use
a premium quality grade EP-2, high temperature grease with wear inhibiting additive.
4. Remove the grease line (
29
) at the
hammer (KK).
5. Attach a grease gun (t37) or power
greaser to the grease fitting (
30
) on the
front side of the pump assembly (FZ).
