64
Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
This partition must contain the cluster container, the DriverSet, the Landing Zone OU, and the
server containers (Virtual NCP
TM
Servers, Volumes, and Pools).
The drivers are not communicating on the same port.
For example, if the driver on Cluster A is listening on port 2002, the driver on Cluster B must
bind to port 2002 on Cluster A in order for the driver communication to work properly.
The format for specifying the port number in the IP address field is
remote IP:remote
port:local port
. For example, you could specify something similar to 10.1.1.1:2001:2001. If it
is not being used for other drivers, port 2001 can be used for the user object driver and port
2002 for the cluster object driver.
See
Tracing IDM
below.
4.11 Tracing IDM
DSTRACE is used to trace IDM communications. In a BCC, it is generally best to trace both sides
of the communication channel (both drivers).
To trace the communications for the BCC IDM drivers on a NetWare BCC
1
Modify two attributes on both DriverSet objects.
1a
Start your Internet browser and enter the URL for iManager.
The URL is http://
server_ip_address
/nps/iManager.html. Replace
server_ip_address
with
the IP address or DNS name of the server that has iManager and the IDM preconfigured
templates for iManager installed.
1b
Enter your username and password.
1c
Click the
View Objects
button at the top of the iManager page.
1d
In the left column, browse to and right-click the desired DriverSet object, then select
Modify Object
.
1e
Click the
General
tab, and in the list of valued attributes, click
DirXML-DriverTraceLevel,
then click Edit.
1f
Ensure that the Trace Level is set to 4, then click
OK
.
1g
Repeat
Step 1e
and
Step 1f
for the DirXML-XSLTraceLevel attribute, also setting the
trace level to 4.
1h
Repeat
Step 1d
through
Step 1g
for the other driver sets you want to trace.
2
At the NetWare server console, load DSTRACE by entering
dstrace
.
3
Configure DSTRACE by entering
dstrace inline -all +dvrs +dxml
at the
NetWare server console.
4
Enable DSTRACE by again entering
dstrace
at the NetWare server console.
5
Run the desired actions for the information you want traced.
6
Disable DSTRACE by entering
dstrace off
at the NetWare server console.
The trace file is located at
sys:/system/dstrace.log
. You might want to delete this file
before starting a trace so the events logged in the file are specific to the actions you are tracing.
