Upgrading BCC
3
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
53
3
Upgrading BCC
BCC 1.0 supports only Novell
®
Cluster Services
TM
for NetWare
®
. This section covers two upgrade
scenarios:
Section 3.1, “Upgrading BCC 1.0 to BCC 1.1 for NetWare,” on page 53
Section 3.2, “Upgrading BCC 1.0 to BCC 1.1 for Linux,” on page 55
3.1 Upgrading BCC 1.0 to BCC 1.1 for NetWare
To upgrade from BCC 1.0 to BCC 1.1 for NetWare you need to
1. Upgrade NetWare and apply the latest patches on the cluster servers in each cluster.
2. Install Identity Manager (IDM) 2 Bundle Edition on one server in each cluster.
3. Install BCC 1.1 on all nodes where BCC 1.0 is installed.
4. Reset credentials for the BCC Administrative user.
5. Authorize the BCC Administrative user.
6. Verify SAN scripts.
7. Delete and re-create BCC-specific IDM drivers.
3.1.1 Upgrading NetWare
NetWare must be upgraded on each BCC cluster server to NetWare 6.5 Support Pack 5 (same as
OES NetWare Support Pack 2), which is the minimum requirement for BCC 1.1. See
Section 2.1,
“Requirements,” on page 19
for more information on what is required for BCC 1.1. See
Upgrading
to OES NetWare (http://www.novell.com/documentation/oes/install-nw/data/
hqwoj1yu.html#hqwoj1yu)
for more information on upgrading NetWare.
In addition to upgrading NetWare, you must also apply the latest NetWare and Cluster Services
patches to the upgraded servers. See the
BCC 1.1 Readme file (http://www.novell.com/
documentation/bcc11/readme/data/readme.html)
for instructions on the necessary patches.
Performing a Rolling Cluster Upgrade
Performing a rolling upgrade to NetWare 6.5 Support Pack 5 (SP 5) and applying the latest patches
lets you keep your cluster up and running and lets your users continue to access the network while
the upgrade is being performed.
During a rolling cluster upgrade, one server is upgraded to NetWare 6.5 SP 5 and the latest patches
are applied while the other servers in the cluster continue running a previous support pack of
NetWare 6.5. Then another server is upgraded to NetWare 6.5 SP 5 with the latest patches, and then
another, until all servers in the cluster have been upgraded to NetWare 6.5 SP 5 with the latest
patches.
After upgrading NetWare and applying the latest patches, reboot the server to automatcially load
Cluster Services software.
