54
Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
During the upgrade process, cluster pools, volumes, and resources will fail over from the server
being upgraded to other servers in the cluster. After a cluster server is upgraded and brought back
online, the pools, volumes, and resources that failed over to other servers during the upgrade process
fail back to the upgraded server.
3.1.2 Installing or Upgrading IDM
You must upgrade to or install IDM 2 Bundle Edition on one cluster server in each cluster of your
BCC. If you are upgrading to IDM on a BCC server where DirXML is installed, see
Upgrading
(http://www.novell.com/documentation/dirxml20/admin/data/ampxjxi.html)
and
Common
Installation Scenarios (http://www.novell.com/documentation/dirxml20/admin/data/
brpgxw9.html#brpgxw9)
in the
IDM 2.0.1 Administration Guide
.
If you are installing IDM 2 Bundle Edition, see
Section 2.2, “Installing Identity Manager,” on
page 21
.
3.1.3 Installing BCC 1.1
After upgrading NetWare and IDM, you must install BCC 1.1 on all cluster nodes that will be part of
your BCC. See
Section 2.3, “Installing Novell Business Continuity Cluster Software,” on page 23
for information on installing BCC 1.1.
The BCC 1.1 installation program autodetects if BCC 1.0 is installed and performs the necessary
updates to convert BCC 1.0 to BCC 1.1. This includes searching eDirectory
TM
for SAN scripts and
updating those scripts to be SMI-S compliant.
3.1.4 Resetting BCC Administrative User Credentials
The BCC Administrative user credentials that were set for BCC 1.0 do not work with BCC 1.1. A
fully distinguished eDirectory name (FDN) was required for BCC 1.0, but BCC 1.1 requires only
the BCC administrator name. For instructions on resetting BCC Administrative user credentials, see
Section 2.6.2, “Changing Cluster Peer Credentials,” on page 45
.
3.1.5 Authorizing the BCC Administrative User
The BCC admistrative user must be a trustee of the cluster objects in your BCC, and have at least
read and write rights to the all attributes rights property.
1
Start your Internet browser and enter the URL for iManager.
The URL is http://
server_ip_address
/nps/iManager.html. Replace
server_ip_address
with the
IP address or DNS name of the NetWare server that has iManager and the IDM preconfigured
templates for iManager installed.
2
Enter your username and password.
3
In the left column, click
Rights
, then click the
Modify Trustees
link.
4
Specify the cluster object name or browse and select it, then click
OK
.
5
If the BCC Administrative user is not listed as a trustee, click the
Add Trustee
button, browse
and select the user object, then click
OK
.
6
Click
Assigned Rights
for the BCC administrative user, then ensure that the Read and Write
check boxes are selected for the All Attributes Rights property.