background image

no

vd

ocx (

e

n)

  1

1

 Decemb

er

 2

007

Legal Notices

Novell, Inc., makes no representations or warranties with respect to the contents or use of this documentation, and 
specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. 
Further, Novell, Inc., reserves the right to revise this publication and to make changes to its content, at any time, 
without obligation to notify any person or entity of such revisions or changes.

Further, Novell, Inc., makes no representations or warranties with respect to any software, and specifically disclaims 
any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc., 
reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to 
notify any person or entity of such changes.

Any products or technical information provided under this Agreement may be subject to U.S. export controls and the 
trade laws of other countries. You agree to comply with all export control regulations and to obtain any required 
licenses or classification to export, re-export or import deliverables. You agree not to export or re-export to entities on 
the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. 
You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. See the 

Novell International Trade Services Web page (http://www.novell.com/info/exports/)

 for more information on 

exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export 
approvals.

Copyright © 2007-2008 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, 
stored on a retrieval system, or transmitted without the express written consent of the publisher.

Novell, Inc., has intellectual property rights relating to technology embodied in the product that is described in this 
document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. 
patents listed on the 

Novell Legal Patents Web page (http://www.novell.com/company/legal/patents/)

 and one or 

more additional patents or pending patent applications in the U.S. and in other countries.

Novell, Inc.
404 Wyman Street, Suite 500
Waltham, MA 02451
U.S.A.
www.novell.com

Online Documentation:

 To access the latest online documentation for this and other Novell products, see 

the 

Novell Documentation Web page (http://www.novell.com/documentation)

.

Summary of Contents for BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION



































































































Reviews: