Installation and Setup
31
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
Port number for this driver:
If you have a business continuity cluster that consists of
three or four clusters, you must specify unique port numbers for each driver template set.
The default port number is 2002.
You must specify the same port number for the same template in the other cluster. For
example, if you specify 2003 as the port number for the resource synchronization
template, you must specify 2003 as the port number for the resource synchronization
template in the peer driver for the other cluster.
Full Distinguished Name (DN) of the cluster this driver services:
For example,
Cluster1.siteA.Novell.
Fully Distinguished Name (DN) of the landing zone container:
Specify the context of
the container where the cluster pool and volume objects in the other cluster will be placed
when they are synchronized to this cluster. This container is referred to as the landing
zone. The NCP server objects for the virtual server of a BCC enabled resource will also be
placed in the landing zone.
IMPORTANT:
The context must already exist and must be specified using dot format
without the tree name. For example, siteA.Novell.
Prior to performing this step, you could create a separate container in eDirectory specificly
for these cluster pool and volume objects. You would then specify the context of the new
container in this step.
The IDM Driver object must have sufficient rights to create, modify, and delete objects and
attributes in the following containers:
The Identity Manager driver set container.
The container where the Cluster object resides.
The container where the Server objects reside.
If server objects reside in multiple containers, this must be a container high enough in the
tree to be above all containers that contain server objects.
Best practice is to have all server objects in one container.
The container where the cluster pool and volume objects will be placed when they are
synchronized to this cluster.
This container is referred to as the landing zone. The NCP server objects for the virtual
server of a BCC enabled resource will also be placed in the landing zone.
You can do this by making the IDM Driver object security equivalent to another user object
with those rights. See
Step 9 on page 31
.
If you choose to include User object synchronization, exclude the Admin User object from
being synchronized. See
Step 7 on page 83
.
9
Make the IDM Driver object security equivalent to an existing User object.
9a
Click
Define Security Equivalences
, then click
Add
.
9b
Browse to and select the desired User object, then click
OK
.
9c
Click
Next
, then click
Finish
.
10
Repeat
Step 1
through
Step 9
above on the other clusters in your business continuity cluster.
This includes creating a new driver and driver set for each cluster.
