Installation and Setup
43
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
You can check the Use Regular Expressions check box to use wildcard characters in your search and
replace values. The following links provide information on regular expressions and wildcard
characters:
Regular Expressions (http://www.opengroup.org/onlinepubs/007908799/xbd/re.html)
Regular-Expressions.info (http://www.regular-expressions.info/)
Wikipedia (http://en.wikipedia.org/wiki/Regular_expression)
oreilly.com (http://www.oreilly.com/catalog/regex/)
You can find additional information on regular expressions and wildcard characters by searching the
Web.
IMPORTANT:
If you change the resource-specific search and replace data after initially adding it,
you must update the resource load and unload script in one of the other clusters by editing it and
adding a space or a comment to it. This will cause the script to be updated with the new search and
replace data.
You could also update the IP address on the cluster protocols page in iManager to cause IP address
search and replace values to be updated for both load and unload scripts. This might require you to
go back and change the IP addresses specified in the resource load and unload scripts in the source
cluster to their original values.
Selecting Peer Clusters for the Resource
Peer clusters are the other clusters that this cluster resource can be migrated to. The cluster or
clusters that you select determine where the resource can be manually migrated. If you decide to
migrate this resource to another cluster, you must migrate it to one of the clusters that have been
selected.
1
Select the other clusters that this resource can be migrated to.
2
Do one of the following:
If you are creating a new nonpool resource, click
Finish
.
If this is an existing cluster resource, click
Apply
.
If you are creating a new cluster pool resource, click
Next
and continue with the
Adding
Disk Array Mapping Information
section below.
If this is an existing cluster pool resource, continue with the
Adding Disk Array Mapping
Information
section below.
Adding Disk Array Mapping Information
For information on adding disk array mapping information, see
“Adding SAN Management
Configuration Information” on page 37
.
2.6 Managing a Novell Business Continuity
Cluster
After you have installed, set up, and configured Novell Business Continuity Cluster software and
resources, some additional information can be useful to help you effectively manage your business
continuity cluster. This information consists of instructions for migrating resources from one cluster