38
Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
You can also delete a script, edit a script by clicking
Details
, or change the order that load
scripts execute by clicking the
Move Up
and
Move Down
links.
7b
Fill in the values on the SAN Management Script Details page, click
Apply
and then
OK
,
and then click
OK
on the Resource Properties page.
NOTE:
After clicking Apply and OK on the Script Details page, you are returned to the
Resource Properties page (with the Business Continuity tab selected) If you do not click
OK on the Resource Properties page, your script changes will not be saved.
Descriptions of the information required for the page fields and options include:
Name and Description:
Specify a name, and if desired, a description of the script
you are creating.
CIMOM IP/DNS:
If you are not using a template and checked the
CIM Client
check
box in the previous screen, specify the IP address or DNS name for your SAN. This
is the IP address or DNS name that is used for SAN management.
Namespace:
If you checked the CIM Client check box in the previous screen, accept
the default namespace, or specify a different namespace for your SAN.
Namespace determines which models and classes are used with your SAN. Consult
your SAN documentation to determine which namespace is required for your SAN.
Username and Password:
If you checked the CIM Client check box in the previous
screen, specify the username and password that is used to connect to and manage
your SAN.
Port:
If you checked the CIM Client check box in the previous screen, accept the
default port number or specify a different port number. This is the port number that
CIMOM (your SAN manager) uses. Consult your SAN documentation to determine
which port number you should use.
Secure:
If you checked the CIM Client check box in the previous screen, check or
uncheck the Secure check box depending whether you want SAN management
communication to be secure (http or https).
Script Parameters:
Script parameters let you specify variables and values for those
variables that are used in the SAN management script.
To specify a variable, click New and then provide the variable name and value in the
fields provided. Click
OK
to save your entries. You can specify additional variables
by clicking
New
again and providing variable names and values. You can also edit
and delete existing script parameters by clicking the applicable link.
Script Parameters Text Box:
You can use the text box to add script commands to
the script you are creating.
These script commands are specific to your SAN hardware. You can add a Perl script,
or any commands that can be run on Linux or NetWare (depending on your
platform). If you add commands to call outside scripts, those scripts must exist on
every server in the cluster.
CIM Enabled:
You can check this box if your SAN supports SMI-S and you did not
check the CIM Client checkbox on the previous screen. This will cause the CIM-
specific fields to become active on this screen.
Synchronous:
If this check box is left unchecked, multiple scripts can be run
concurrently. Checking the box causes scripts to run individually, one after another.
Most SAN vendors do not support running multiple scripts concurrently.
