78
IMS-MN-LMDA42C_A.pdf
ICP0531 Encoder Back-up Battery Pack
LMD CANopen
Installing/Replacing the Batteries
NOTE:
Use only Energizer L91 1.5V AA Lithium batteries.
WARNING
FLAME OR FIRE HAZARD
Do not load or transport lithium ion batteries if the packaging is damaged. A flammability hazard exists
if package is damaged. Handle with care.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
Attention
: If Lithium batteries are installed, provide proper package warning labels to all
shipping containers as required by law.
1. Open the battery pack by removing the four (4) screws on the back side of the case, as
shown below:
2. Install the batteries, taking care to match the imprints on the battery holder.
+
+
+
–
–
–
