2
For information on the availability of products, go to
The information contained in the present document is subject to change without notice. The
technical characteristics of the devices described in the present document also appear online.
The characteristics that are presented in the present document should be the same as those
characteristics that appear online. In line with our policy of constant improvement, we may
revise content over time to improve clarity and accuracy. If there is a difference between the
document and online information, use the online information as reference. All details provided
are technical data which do not constitute warranted qualities.
Some of the product designations are registered trademarks of their respective owners, even if
this is not explicitly indicated.
The information provided in this documentation contains general descriptions and/or technical
characteristics of the performance of the products contained herein. This documentation is
not intended as a substitute for and is not to be used for determining suitability or reliability
of these products for specific user applications. It is the duty of any such user or integrator to
perform the appropriate and complete risk analysis, evaluation and testing of the products with
respect to the relevant specific application or use thereof.
Neither Novanta IMS nor any of its affiliates or subsidiaries shall be responsible or liable for
misuse of the information contained herein. If you have any suggestions for improvements or
amendments or have found errors in this publication, please notify us.
You agree not to reproduce, other than for your own personal, noncommercial use, all or part of
this document on any medium whatsoever without permission of Novanta IMS, given in writing.
You also agree not to establish any hypertext links to this document or its content.
Novanta IMS does not grant any right or license for the personal and noncommercial use of the
document or its content, except for a non-exclusive license to consult it on an “as is” basis, at
your own risk. All other rights are reserved.
All pertinent state, regional, and local safety regulations must be observed when installing
and using this product. For reasons of safety and to help ensure compliance with documented
system data, only the manufacturer should perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant
instructions must be followed. Failure to use Novanta IMS software or approved software with
our hardware products may result in injury, harm, or improper operating results.
Failure to observe this information can result in injury or equipment damage.
