8
IMS-MN-LMDA42C_A.pdf
ABOUT THIS MANUAL
Introduction
Read and understand the material contained in this manual before working on LMD products for
the first time. Take particular note of the safety information (see “Safety Information” on page
5). Only qualified persons are allowed to work with the LMD product (see “Qualification of
A copy of this manual must be available for personnel who work with LMD products.
The purpose of this manual is to show the capabilities of the LMD and how to use it safely and
properly. Follow the instructions within this manual to help:
• reduce risks,
• reduce repair costs and downtime of the LMD product,
• increase the service life of the LMD product, and
• increase reliability of the LMD product.
Terminology Derived from Standards
The technical terms, terminology, symbols and the corresponding descriptions in this manual,
or that appear in or on the products themselves, are generally derived from the terms or
definitions of international standards.
In the area of functional safety systems, drives and general automation, this may include, but
is not limited to, terms such as safety, safety function, safe state, fault, fault reset, malfunction,
failure, error, error message, dangerous, etc.
Among others, these standards include:
EN 61131-2:2007
Programmable controllers, Part 2: Equipment requirements and tests.
ISO 13849-1:2008
Safety of machinery: Safety-related parts of control systems. General principles for design.
EN 61496-1:2013
Safety of machinery: Electro-sensitive protective equipment. Part 1: General requirements and
tests.
ISO 12100:2010
Safety of machinery: General principles for design - Risk assessment and risk reduction.
IEC/EN60204-1:2006
Safety of machinery: Electrical equipment of machines - Part 1: General requirements.
EN 1088:2008
ISO 14119:2013
Safety of machinery: Interlocking devices associated with guards - Principles for design and
selection.
ISO 13850:2006
Safety of machinery: Emergency stop - Principles for design.
IEC/EN 62061:2005
Safety of machinery: Functional safety of safety-related electrical, electronic, and electronic
programmable control systems.
IEC 61508-1:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems:
General requirements.
IEC 61508-2:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems:
Requirements for electrical/electronic/programmable electronic safety-related systems.
IEC 61508-3:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems:
Software requirements.
IEC 61784-3:2008
Digital data communication for measurement and control: Functional safety field buses.
2006/42/EC
Machinery Directive
2014/30/EU
Electromagnetic Compatibility Directive
2014/35/EU
Low Voltage Directive
