Northern Lights TA-258, Assembly Manual And Owner'S Manual

Page: 8 / 38

Assembly Guide and Owner’s Manual 7
Assembly Guide (English)
The unit is shipped in one box. You will need assistance to assemble this unit, especially when
assembling multiple parts or moving the equipment. Ask for help from two or more people to
unpack and assemble the treadmill. Do
NOT attempt assembly by yourself.
WARNING
It is very important to follow the assembly instructions correctly and to make sure
all parts are firmly tightened. If the assembly instructions are not followed
correctly, the treadmill could have parts that are not tightened and will seem loose
and may cause irritating noises. To prevent the treadmill from damage, risk of
burns, fire of burns, fire, electric shock, or injury to persons, the assembly
instructions must be reviewed and corrective actions should be taken.
To ensure ease of product assembly, please take time to verify the size and quantities of all
required assembly hardware. Use the itemized parts listing for reference.
The product assembly process has been documented in easy to follow stages. Please read all
assembly instructions carefully. Take time to review the manual and familiarize yourself with
the entire assembly process before proceeding.
Use this treadmill only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
Perform product assembly in a 4ft. x 6ft. flat area .
Note: After assembly is completed, allow a minimal of 2-3ft. of space on each side of the unit for
user access. Provide a minimum of 3
⅟₂
feet clearance between the rear of the treadmill and any
fixed object.
Access to a 100-120 volt, 15-20 ampere grounded outlet for the unit in the following area: USA,
Canada, Japan, and Taiwan (or access to a 220-240 volt, 10-15 ampere grounded outlet in other
countries.)
Do not attempt to disable the grounded plug by using improper adapters, or in any way modify
the core set. A serious shock or fire hazard may result along with computer malfunctions.
Make sure the power switch is OFF and the treadmill is not plugged into a power source.
Do not dispose of any packaging materials until assembly of the product is completed.
Assembly tools are included, but you may also use standard household tools to complete
assembly of this product.
If you plan to move the unit, obtain help and lift it properly. Grasp the rear end of the
treadmill. Lift the treadmill and roll it on its front wheels. Do not grasp any other plastic part
while lifting or moving the unit. The other plastic parts are not reinforced and they may break.