Nortel Symposium TAPI Service Provider for Succession 3.0 User Manual Download Page 50

Page: 50 / 198

Chapter 2 Installation guidelines

213346.02

Installing Symposium TAPI SP software

To install Symposium TAPI SP on the TAPI server, perform the following tasks:

Log on to the TAPI server.

Insert the Symposium TAPI Service Provider CD into the CD drive.

The Setup program automatically launches the wizard-driven installation
application. If not,

•

Select “Start ->Run”.

•

Type X:\setup.exe, where X is the CD drive.

•

Click OK to start the wizard-driven installation application.

The installation application issues the following notification if it detects a
previous release of Symposium TAPI SP . If this occurs, refer to

Chapter 5,

“Upgrading Symposium TAPI SP,” on page 117

, for further information.

Note:

Before you install Symposium TAPI SP, close any TAPI

application running on the server or client.

Summary of Contents for Symposium TAPI Service Provider for Succession 3.0







































































































































































































Search results

Summary of Contents for Symposium TAPI Service Provider for Succession 3.0

Reviews:

Nortel Symposium TAPI Service Provider for Succession 3.0, User Manual, Page: 50 / 198

Search results

Summary of Contents for Symposium TAPI Service Provider for Succession 3.0

Reviews: