Nortel Symposium TAPI Service Provider for Succession 3.0, User Manual, Page: 44 / 198

44 Chapter 2 Installation guidelines
213346.02
NEW ROUT 0.0.0.0 47.1.1.250
where
47.1.1.250
is the IP address of the default gateway
Primary IP address procedures
This section provides procedures for the activation, validation, and recovery of the
Primary IP address.
Activation procedure
Manually initialize the system to activate the connection to the IP address
configured in overlay 117.
Validation procedure
To verify that the primary IP address is active, compare the IP address configured
in overlay 117 with the IP address used in overlay 137. The IP addresses must be
identical in both overlays To perform the validation, use the following sample as a
template, substituting relevant values where appropriate:
> LD 117<cr>
OAM000
PRT ELNK<cr>
ACTIVE ETHERNET: PRIMARY_IP 47.48.49.50
INACTIVE ETHERNET: SECONDARY_IP 47.48.49.51
OK
> LD 137 <cr>
CIOD000
STAT ELNK<cr>
ELNK ENABLED
Ethernet (ln unit number 0):
Host: PRIMARY_IP Internet address: 47.48.49.50
Note: You must perform a manual initialization to establish the initial
connection to the primary IP address. After the connection is established,
another manual initialization is required only if the primary IP address is
changed.