Nortel Passport 8672ATME, Using Manual

Page: 91 / 162

Chapter 5 Managing the Passport 8672ATME Module with the CLI 91
Using the Passport 8672ATME Module
show ports info atm pvc command
This command displays information (Figure 33) about the permanent virtual
circuits (PVCs) for the specified port or for all ports. The command uses the
syntax:
show ports info atm pvc [< ports>]
MAX-BITS VCI This field is read only. It takes remaining bits from
NumVpiBits. For example, if NumVpiBits is 3 for OC-3c,
then NumVciBits is 8.
CLOCK SOURCE Indicates whether the Clock Source is either:
• line
• internal
LOOPBACK MODE Indicates the loopback mode:
• off
• internal
• external
ADMIN STATE Indicates the Admin State of the port, either:
• up
• down
STATUS Indicates the status of the port, either:
• up
• down
Table 24 Information fields for the show ports info atm ports
command (continued)
Field Description