Nortel Passport 8672ATME, Using Manual

Page: 47 / 162

47
Using the Passport 8672ATME Module
Chapter 4
Managing the Passport 8672ATME Module with
Device Manager
Two management tools enable you to manage your Passport 8672ATME Module:
Device Manager and the command line interface (CLI). You can also use the
embedded Web-based management feature to monitor the 8672ATME Module.
This chapter contains information on these topics:
• “Port numbering ,” next
• “Device Manager” on page 48
• “Configuring and managing ATM” on page 51
• “Configuring ATM F5-OAM End-to-End Loopback” on page 70
Refer to Chapter 5, “Managing the Passport 8672ATME Module with the CLI ”
for information about managing your Passport 8672ATME Module with the CLI
and monitoring the module with the Web-based management features.
Port numbering
You must install an MDA into the Passport 8672ATME Module in order to have
connectivity. The module contains two slots for MDAs, and you can mix and
match among the following MDAs, which are available in both SMF and MMF:
• 1-port OC-12c/STM-4
• 4-port OC-3c/STM-1