Nortel Passport 8672ATME, Using Manual

Page: 39 / 162

Chapter 3 Installing the Passport 8672ATME Module 39
Using the Passport 8672ATME Module
Installing the Passport 8672ATME Module
To install the Passport 8672ATME Module:
1 Remove the filler panel from the module slot in the Passport 8600 series
chassis
(Figure 5) .
Figure 5 Removing the filler panel
2 Make sure the inserter/extractor levers are extended away from the
Passport 8672ATME Module front panel
(Figure 6) .
Figure 6 Extending the inserter/extractor levers
.
Note: Always handle an I/O module by the sides and carefully slide it
out of the chassis. Place the module on a grounded work surface and in
an antistatic bag for storage.
9058FB
9059FA