Nortel Passport 8672ATME, Using Manual

Page: 126 / 162

126 Chapter 6 Configuring the Passport 8672ATME Module
209195-B
h If you select vbr in the Service type field, complete these fields:
In the PeakCellRate field, enter the PCR (an integer between 86 and
733490).
In the SustainedCellRate field, enter the SCR (an integer between 86 and
733490).
In the MaxBurstSize field, type the maximum burst size (an integer
between 2 and 255).
5
Click Insert.
The ATM, Insert ATM dialog box closes, and the ATM PVC tab is
redisplayed.
6 Click Close.
Associating the PVC with the VLAN
1
From the Device Manager menu bar, choose Edit > ATM.
The Port dialog box opens with the ATM tab displayed ( Figure 16 on
page 59 ).
Table 8 on page 59 describes the ATM tab items.
2 Click the ATM 1483 ELAN tab.
The ATM 1483 ELAN tab opens.
3
Click Insert.
The Insert ATM 1483 ELAN dialog box opens ( Figure 21 on page 66 ).
Table 12 on page 66 describes the Insert ATM 1483 ELAN dialog box fields.
4 Do the following:
a
In the Port field, click the button to view ports.
b
Select the port for which you configured the ATM PVC in “Configuring
two ATM 1483 PVCs on the same ATM port” on page 128 .
c
In the VlanId field, enter the VLAN Id you created in “Creating a VLAN
“byPort” and adding ports” on page 121 .
d In the PvcIds field, enter the value for the PVC IDs you created in
“Configuring two ATM 1483 PVCs on the same ATM port” on page 128 .
e
In the ConnectType field, select bridged.