Handling local printing
75
Changing a local printer type
Standard 1.0
Network Administration Center
November 1998
User Guide Supplement
Changing a local printer type
Changing the type
of local printer
To change the type of local printer, follow these steps.
Starting Point: NAC 2.5 supervisor workstation
Step Action
1
Display any NAC 2.5 screen.
2
Press Control P.
Result: The Local Printer Control Window appears.
3
In the Printer Type field, press Options.
Result: A list of available printer types appears.
4
Select your printer type from the list.
Result: Your entry appears in the Printer Type field.
5
Press Commands and select “Save changes and exit.”
Result: A pop-up window appears to confirm that the printer is
being changed. This message warns that print jobs on all
printers being used by NAC are stopped until the local printer is
changed.
6
Type y to continue.
Result: A pop-up window appears to confirm that the local
printer is being changed. After the printer is added, this
message appears at the bottom of the screen: “Local printer
type has been changed.”
Summary of Contents for NAC
Page 7: ...viii Contents Standard 1 0 Network Administration Center November 1998 User Guide Supplement ...
Page 8: ...Preface About this guide In this preface Overview x Inside this guide xi ...
Page 96: ...Chapter 8 Configuring 10 nodes In this chapter Overview 86 Configuring the nodes 87 ...
Page 126: ...Chapter 10 Handling error messages In this chapter Overview 116 Error messages 117 ...