40
Using the Meridian Terminal Emulator
Overview
Standard 1.0
Network Administration Center 2.5
November 1998
User Guide Supplement
Overview
Introduction
The Meridian Terminal Emulator (MTE), Release 9, allows you
to use your personal computer to access the NAC 2.5, Meridian
MAX, and Customer Controlled Routing applications.
NAC 2.5 works only with MTE 9.
In this chapter
This chapter provides information on how to connect MTE 9 to
NAC 2.5. For any other information on MTE 9, refer to the
MTE User Guide (P0881398).
MTE 9 features
MTE 9 provides numerous features, such as
•
an interface from your PC to NAC 2.5, Meridian MAX, and
CCR
•
a LAN connection
•
the ability to print NAC reports to a printer attached to your
PC
•
the ability to save reports to a file
•
the ability to preview reports on your screen
For other details on these and other MTE features, refer to the
MTE User Guide (P0881398).
MTE 9 features
not supported by
NAC 2.5
You cannot use the following MTE 9 features with NAC 2.5:
•
customize programmable buttons
•
save to a file for MAXcaster
•
monitor the real-time status of the agents
Summary of Contents for NAC
Page 7: ...viii Contents Standard 1 0 Network Administration Center November 1998 User Guide Supplement ...
Page 8: ...Preface About this guide In this preface Overview x Inside this guide xi ...
Page 96: ...Chapter 8 Configuring 10 nodes In this chapter Overview 86 Configuring the nodes 87 ...
Page 126: ...Chapter 10 Handling error messages In this chapter Overview 116 Error messages 117 ...