Configuring 10+ nodes
95
Configuring the nodes
Standard 1.0
Network Administration Center
November 1998
User Guide Supplement
5
Find the node that you want to delete.
Note: This is the node you identified in “Identifying nodes to be
reassigned” on page 87 and “Identifying node numbers” on
page 89.
6
On a piece of paper, copy the information that corresponds to
the node to be deleted.
Note: You need to make note of this information because you
must reinsert it later. From the sample screen, you make note
of the information that corresponds to Node 500 or Node 666.
Both nodes contain Meridian MAX 9 (or higher) applications.
7
Delete the node.
Note: In the sample screen, you delete Node 500 or
Node 666 because they both contain Meridian MAX 9 (or
higher) applications.
8
Complete an entry for the new node that contains the Meridian
MAX 8 (or lower) application.
9
Press PF1 to display the Commands menu.
Step Action
Summary of Contents for NAC
Page 7: ...viii Contents Standard 1 0 Network Administration Center November 1998 User Guide Supplement ...
Page 8: ...Preface About this guide In this preface Overview x Inside this guide xi ...
Page 96: ...Chapter 8 Configuring 10 nodes In this chapter Overview 86 Configuring the nodes 87 ...
Page 126: ...Chapter 10 Handling error messages In this chapter Overview 116 Error messages 117 ...