Configuring 10+ nodes
89
Configuring the nodes
Standard 1.0
Network Administration Center
November 1998
User Guide Supplement
Identifying node
numbers
After you identify the nodes assigned to Meridian MAX 9 (or
higher) applications, you must find the node numbers that
correspond to the first 10 nodes. This is done from the error log.
To identify the node numbers, follow these steps.
Starting Point: NAC 2.5 maintenance console
6
From the NAC 2.5 maintenance console, bring the system
down and restart it.
Note: For more information on how to shut down the system,
refer to the Network Administration Guide (NAC) System
Administration and Maintenance Guide (NTP 553-4011-510),
“Maintenance and administration programs: system running”
chapter, “Shutdown the System” section.
Note: For more information on how to restart the system, refer
to the Network Administration Guide (NAC) System
Administration and Maintenance Guide (NTP 553-4011-510),
“Maintenance and administration programs: system shutdown”
chapter, “Restart and Power Down Utilities” section.
Step Action
Step Action
1
Display the NAC Maintenance and Administration menu.
2
Select Diagnostics.
Result: The NAC System Diagnostics menu appears.
Summary of Contents for NAC
Page 7: ...viii Contents Standard 1 0 Network Administration Center November 1998 User Guide Supplement ...
Page 8: ...Preface About this guide In this preface Overview x Inside this guide xi ...
Page 96: ...Chapter 8 Configuring 10 nodes In this chapter Overview 86 Configuring the nodes 87 ...
Page 126: ...Chapter 10 Handling error messages In this chapter Overview 116 Error messages 117 ...