46
Using the Meridian Terminal Emulator
Connecting through a serial port or modem
Standard 1.0
Network Administration Center 2.5
November 1998
User Guide Supplement
7
From the pop-up menu, select MTE 9 or above.
Result: The entry appears in the Device field.
8
In the Connect field, press PF2 and select Direct or Modem.
Note: If you select Modem, you must also enter a value in the
Baud field.
9
In the Name/Comment field, enter appropriate information if
desired.
10
Press PF1 to display the Commands menu.
11
Select “Save changes and exit.”
Step Action
Summary of Contents for NAC
Page 7: ...viii Contents Standard 1 0 Network Administration Center November 1998 User Guide Supplement ...
Page 8: ...Preface About this guide In this preface Overview x Inside this guide xi ...
Page 96: ...Chapter 8 Configuring 10 nodes In this chapter Overview 86 Configuring the nodes 87 ...
Page 126: ...Chapter 10 Handling error messages In this chapter Overview 116 Error messages 117 ...