Nortel NAC, User Manual, Page: 49 / 132

38 Configuring the modems
Network link and Racal VI2422PA modem
Standard 1.0 Network Administration Center November 1998
User Guide Supplement
9 Type ATE0 followed by Enter.
Result: The system does not show a response.
10 Type AT&W followed by Enter.
Note: This command does not appear on the screen.
Result: The system does not show a response.
11 Power down the modem and workstation.
12 Disconnect the workstation from the modem.
13 Connect the modem directly to the NAC 2.5 using an
NT7D99AA modem cable.
14 Verify that the modem is connected to the telephone system
with an RJ-11 cable/connector.
15 Power up the modem.
16 Through the use of the Racal modem’s front panel, choose
option 1 and set the value to 1.
17 Choose option 13 and set the value to 2.
18 Connect the modem at the Meridian MAX site and power it up.
Result: The NAC 2.5 modem dials the Meridian MAX
telephone number that you entered earlier in this procedure.
Note: The connection between the NAC site and the Meridian
MAX site is confirmed when the carrier detect LED remains
illuminated.
Step Action