Nortel Meridian Installation And Administration Manual Download Page 86

Page: 86 / 256

Meridian Digital Telephone IP Adapter Installation and Administration Guide

Configuring the IP Adapter unit using the telephone menu

Standard 1.1

The telephone display asks if you want to modify the emergency code,
similar to the following:

Modify Emergency Code?
[1-Yes 2-No]

This step does not apply to Meridian Digital Telephone IP Adapter units.
Press

and continue to step 8 on page 63.

retain the current
time offset
between the PBX
at the host site and
the Meridian
Digital Telephone
IP Adapter

unit at

the remote site,

a. Press

b. Press the

Hold

key.

IF you want to

THEN do the following:

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands