Nortel Meridian Installation And Administration Manual Download Page 113

Page: 113 / 256

Meridian Digital Telephone IP Adapter Installation and Administration Guide

October 2001

Changing configuration settings using Configuration Manager

Configuring IP information

To change the IP information, complete the following procedure:

Complete the fields of the IP Configuration property sheet as described in
“IP Configuration field descriptions”, on page 90.

Click on the

button to save the information in the temporary work file.

Click on the

Send

button to update the

Meridian Digital Telephone IP

Adapter unit with

the new information.

Restart the Meridian Digital Telephone IP Adapter unit.

Note:

To restart a Meridian Digital Telephone IP Adapter unit, use the

procedure found under “Restarting the system”, on page 147.

IF you are

THEN

logged on to the
Meridian Digital
Telephone IP Adapter
unit,

the changes are written into the Meridian
Digital Telephone IP Adapter unit’s buffer.

To save the changes in flash memory, choose
Upload/Download › Save to Flash from the
Menu Bar.

not logged on to the
Meridian Digital
Telephone IP Adapter
unit,

the Configuration Manager dialog box displays,
similar to the following:

Do one of the following:

Log on to the Meridian Digital Telephone
IP Adapter unit, then click on the

Send

button again.

Save the changes to a file on your
administration PC.

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands