Nortel Meridian Installation And Administration Manual Download Page 148

Page: 148 / 256

124

Meridian Digital Telephone IP Adapter Installation and Administration Guide

Administration

Standard 1.1

Bandwidth Connection Statistics field descriptions

The following table describes the statistics on the Bandwidth Connection
Statistics screen:

Statistic

Description

Remote Unit Number

Identifies the remote unit that initiated the call.

Signaling Status

Identifies whether a connection is up on this unit. Valid
options are: Active and Idle.

No of Voice Calls on IP

Identifies the number of calls in progress on this unit’s IP
connection.

No of Voice Calls on PSTN

Note:

PSTN statistics do not apply to Meridian Digital

Telephone IP Adapter units.

Used IP BW

Identifies the IP bandwidth in use on this unit.

Used Trunk BW

Note:

Trunk bandwidth statistics do not apply to Meridian

Digital Telephone IP Adapter units.

Total Up Trunk BW

Note:

Trunk bandwidth statistics do not apply to Meridian

Digital Telephone IP Adapter units.

IP QoS Status

Note:

QoS statistics do not apply to Meridian Digital

Telephone IP Adapter units.

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands