Nortel Meridian Installation And Administration Manual Download Page 84

Page: 84 / 256

Meridian Digital Telephone IP Adapter Installation and Administration Guide

Configuring the IP Adapter unit using the telephone menu

Standard 1.1

The telephone display asks if you want to modify the unit ID of the Meridian
Digital Telephone IP Adapter unit, similar to the following:

Modify Unit ID?
[1-Yes 2-No]

IF you want to

THEN do the following:

modify the Unit
ID of the Meridian
Digital Telephone
IP Adapter

unit,

a. Press

b. Press the

Hold

key.

Result:

The telephone display prompts you for the

new Unit ID and displays the current Unit ID, similar
to the following:

Enter Unit ID of 911x
1

c. Press the digit(s) of the new Unit ID.

d. Press the

Hold

key.

e. Proceed to step 6 on page 61.

retain current Unit
ID of the Meridian
Digital Telephone
IP Adapter unit,

a. Press

b. Press the

Hold

key.

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands