manualshive.com logo in svg

Nortel Meridian, Installation And Administration Manual

Share
Download
Nortel Meridian Installation And Administration Manual Download Page 110

86

Meridian Digital Telephone IP Adapter Installation and Administration Guide

Changing configuration settings using Configuration Manager

 Standard 1.1

SPRE Codes: Online

Enter the SPRE code (maximum seven digits) that is used 
to place your site into online mode, or accept the default. 
The default is #99.

Note: 

The SPRE code is automatically prefixed with the 

pound sign. This means users must dial # before the SPRE 
code when going into online mode.

SPRE Codes: Offline

Enter the SPRE code (maximum seven digits) that is used 
to put your site into offline mode, or accept the default 
code. The default is #98.

Note: 

The SPRE code is automatically prefixed with the 

pound sign. This means users must dial # before the SPRE 
code when going into offline mode.

SPRE Codes: Registration

Enter the SPRE code (maximum seven digits) that engages 
the user’s telephone with a multi-user or dynamic port, or 
accept the default code. The default is #97.

Note: 

The SPRE code is automatically prefixed with a 

pound sign (#). This means users must dial # before the 
SPRE code when registering for a port.

SPRE Codes: 
DeRegistration

Enter the SPRE code (maximum seven digits) that 
disengages the user from a multi-user or dynamic port, or 
accept the default code. The default is #96.

Note: 

The SPRE code is automatically prefixed with a 

pound (#) sign. This means users must dial # before the 
SPRE code when disengaging from a port.

Local Call: Status

This setting does not apply to Meridian Digital Telephone 
IP Adapters.

Local Call: Local Calling 
Key Position

This setting does not apply to Meridian Digital Telephone 
IP Adapters.

Field

Description

Summary of Contents for Meridian

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands