Nortel Meridian Installation And Administration Manual Download Page 155

Page: 155 / 256

Meridian Digital Telephone IP Adapter Installation and Administration Guide

131

October 2001

Administration

Available Modem
Channels

Identifies the number of unused channels on this DSP that
can transmit modem calls.

Total Flex Channels

Identifies the number of channels on this DSP that can
provide multiple functionalities.

Available Flex Channels

Identifies the number of channels on this DSP currently
available to provide multiple functionalities.

Total Tones Channels

Identifies the number of channels on this DSP that can
transmit tones.

Total Reserved Channels

Identifies the number of special purpose channels on this
DSP reserved for internal use.

Name

Identifies the name of the DSP load, that is, the
combination of DSP algorithms, on the DSP module.

Statistic

Description

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands