Nortel Meridian Installation And Administration Manual Download Page 133

Page: 133 / 256

Meridian Digital Telephone IP Adapter Installation and Administration Guide

109

October 2001

Administration

Complete the fields in the Change Password - Local dialog box.

Click on the

button.

Changing the Meridian Digital Telephone IP Adapter unit’s password

To change the Meridian Digital Telephone IP Adapter unit’s password, complete
the following procedure:

From the Menu Bar, choose Connect

➝

Change Password

➝

Node.

Result:

The Change Password dialog box displays, similar to the following:

Complete the fields in the Change Password - Node dialog box.

Click on the

button.

ATTENTION

Do not change the Meridian Digital Telephone IP Adapter
unit’s password until the system is up and working.

Summary of Contents for Meridian

































































































































































































































































Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands

Nortel Meridian, Installation And Administration Manual

Search results

Summary of Contents for Meridian

Reviews:

Brands by name

Popular brands