Nortel ICS 6.1, Manual

Page: 125 / 278

Forwarding your calls /
125
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Turning the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when a call
is redirected on one of its lines.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ÛßßÜÝÝ
.
2. Press
ÛÜßÝß
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
twice.
5. Press
“
twice. The display shows Redirect ring: .
6. Press
CHANGE
to select
Y
(Yes) or
N
(No).
Displays while redirecting lines
Tip -
If a telephone has redirect ring enabled, it rings
briefly for redirected calls on one of its lines even if
another telephone set up the line redirection.
You selected the intercom button as the facility to
place the call on. Enter a line pool code or a
destination code.
Press
¥
or
ADD
to begin redirection. Press
£
or
REMOVE
to cancel a previous redirection.
You have one external line on your telephone,
but you need a second line to perform line
redirection. Redirect your external line using a
line pool as the outgoing line.
You are attempting to redirect a line and the line
you have chosen is the outgoing line you have
selected as a destination. You cannot redirect a
line to itself. Select another line.
Intercom
Line Redirection
QUIT
ADD REMOVE
No line to use
Outgoing line