Nortel ICS 6.1, Manual

Page: 161 / 278

Customizing your telephone /
161
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Default button assignments
Default features are assigned automatically to the programmable buttons
on Norstar telephones and vary depending on the telephone. The default
features are listed in the tables in this chapter.
Rules of default button assignment
• Line and Intercom buttons are assigned by default templates and can
be changed in programming.
• Handsfree/mute and answer DN buttons are not assigned by default. If
these features are defined, however, they are automatically assigned to
specific buttons, as described on this and the following page.
• None of these buttons can be assigned to M7100 or T7100 telephones.
• The handsfree/mute feature appears on the bottom right-hand button
on the M7310 telephone and the bottom button on the M7208
telephone, moving the Intercom button(s) up one position. The
Business Series Terminals have a separate mute button, which is
located under the numeric dialpad, beneath the volume rocker button.
The T7316E telephone also has a handsfree button beside the mute
button, however, this button only works if the telephone is connected
to a system that is version 6.1 or later.
• Each telephone can have up to eight answer DN buttons. On the
M7310 and T7316/T7316E telephones, they appear above Intercom
buttons in the right column and continue up from the bottom in the left
column, replacing the features on those buttons. On the M7208 and
T7208 telephones, answer DN buttons appear above the Intercom
buttons and below external line buttons in a single column.
• External line buttons appear in ascending line order, starting at the top
button in the left column of the M7310 Norstar and M7208 and T7208
telephones. If more than five external lines are assigned to an M7310
telephone, or more than 12 to an M7324 telephone, assignment
continues down the buttons on the right column, erasing the features
on those buttons. Line buttons have priority over feature access
buttons but not handsfree/mute, intercom, or answer DN buttons.
The T7316 starts lines at button 01, which is the fourth button down,
on the left side of the lower button set.
The T7316E starts line numbering at button 09, which is the left top
corner of the lower button set. Refer to the default charts for specific
button placement for these telephones.