Nortel Compact ICS 7.1, Coordinator Manual

Page: 227 / 266

Using System features / 227
N0130955 01 Compact ICS 7.1 System Coordinator Guide
Run/Stop
≤•·
Run/Stop inserts a break point into a sequence of dialed numbers or
characters used for automatic dialing. This may be necessary when you are
connecting to a PBX or similar host system.
For example, you can call a company with an automated attendant that
instructs you to dial the internal number you need. You can program the
company number, a Run/Stop, then the internal number on one external
autodial button. Press the autodial button once to dial the company number.
When you hear the automated attendant, press the autodial button again to
dial the internal number.
The Run/Stop symbol (
fl
) uses one of the 24 spaces in an autodial or speed
dial sequence.
You can include up to three Run/Stop commands in a dialing string. The
system ignores a fourth Run/Stop, and any digits or commands that follow
it in a programmed dialing sequence.
Wait for Dial Tone
≤°‚›
Wait for Dial Tone causes a sequence of numbers to pause until dial tone
is present on the line before continuing to dial. This is useful if you must
dial a remote system and then wait for dial tone from that system before
dialing the rest of your number.
The Wait for Dial Tone symbol (
‡
) uses two of the 24 spaces in an
autodial or speed dial sequence.
Displays
You have entered a code that can only be used in
a programmed autodial or speed dial sequence,
not on a call you dial directly. Programmed
Release and Run/Stop are for use in programmed
dialing sequences only.
Invalid code