Nortel Compact ICS 7.1 Coordinator Manual Download

Page: 197 / 266

Telephone features /

197

N0130955 01

Compact ICS 7.1 System Coordinator Guide

Conference

˚•‹

Allows you to establish a three-way conference between you,
one external caller and one intercom caller. To establish a
conference call:

• Make or answer the first call.
• Enter

˚¤

. This automatically puts the first caller

on hold.

• Make or answer the second call. If the second caller is busy,

replace the handset and enter

˚¤

to return to

the first caller.

• Enter

˚•‹

to complete the conference call.

Conference
Hold

Allows you to put the two conferenced callers on hold. The
held callers remain conferenced. To put the conference on
hold:

• Enter

˚¤

to put the two conferenced callers on

hold.

• Enter

˚¤

to restore the three-way call.

•

Split
Conference

Allows you to alternate between two parties in a three-way
conference call. To consult with one caller and put the other
caller on hold:

• Enter

˚£‹

to split the conference.

• Enter

˚¤

to alternate between calls.

• Enter

˚•‹

to restore the three-way call.

Disconnecting

One Party

Allows you to disconnect one party in a three-way
conference call. To disconnect a party:

• Enter

˚£‹

to put one caller on hold. You are

connected with the other call.

• Replace the handset.
• Lift the handset and enter

˚¤

. You are

connected with the caller on hold.

Hold

˚¤

Allows you to put an active call on hold and allows it to be
picked up from other telephones. When Tones are turned on,
a held call reminder tone is heard on external calls only.

Retrieve a call on Hold.

Enter

˚¤

Summary of Contents for Compact ICS 7.1











































































































































































































































































Search results

Summary of Contents for Compact ICS 7.1

Reviews:

Related manuals for Compact ICS 7.1

Brands by name

Popular brands

Nortel Compact ICS 7.1, Coordinator Manual

Search results

Summary of Contents for Compact ICS 7.1

Reviews:

Related manuals for Compact ICS 7.1

Brands by name

Popular brands