Nortel Compact ICS 7.1, Coordinator Manual

Page: 64 / 266

64 / Answering calls
Compact ICS 7.1 System Coordinator Guide N0130955 01
programming is set to
Auto
. All other telephones have handsfree
assigned to the bottom memory button (right column, on telephones
with two rows of memory buttons).
2. Dial your call.
3. Speak normally.
Muting handsfree
1. Press the mute button to switch off the telephone microphone so that
you can speak privately to someone in your office while you are on a
handsfree call.
2. Press the mute button to turn the microphone back on again and
continue your handsfree call.
Note: The 7208, 7316 and 7316E digital phones have a mute button
located below the dialpad. Other telephones have mute programmed
as a handsfree/mute combination on the bottom memory button
(right, column on telephones that have two rows of memory
buttons). Refer to the user card for the telephones for specifics about
using this button.
Changing a regular call to handsfree
1. Press the handsfree button.
Note: The 7316E digital phone has a handsfree button located below the
dialpad. This button only works if the telephone is wired to a system
running version 6.1 or newer software. On previous version of
software, the handsfree feature is assigned to the lower, right
memory button.
2. Hang up the handset.
Changing a handsfree to a regular call
Lift the handset.