Nortel Compact ICS 7.1, Coordinator Manual

Page: 159 / 266

N0130955 01 Compact ICS 7.1 System Coordinator Guide
User Preferences
The User Preferences section of programming allows you to program
memory buttons, speed dial codes and other settings for any Norstar or
BST telephone on the system.
For example, an employee may want to have the Do Not Disturb feature
programmed onto a memory button or may want to create a speed dial
code. Instead of programming from the employee’s telephone, you can go
into programming on the telephone nearest you to make the change.
Using User Preferences
1. Press
≤••Ë͉Â
(
≤••°‡‹‡
).
2. Enter the Basic password (the default passwords is
¤¤‡›¤
).
(Note: You can also use the Coordinator password to change User
preferences.
By using a Basic password, it is possible to have someone else do day-to-
day upkeep of telephones without giving out access to sensitive
programming. See ‘‘Using passwords’’ on page 217.
After you enter the proper password, the display shows you the telephone
with the lowest internal number followed by its name (For example,
21:RECEPTN
).
1. Press
‘
to move through all the telephones on the system.
2. Press
≠
when you see the telephone you want to change.
The display shows the model number of the telephone at the extension.
The display shows
Connect set
if no telephone is connected at that
internal number. You cannot make changes if the model is
Other
.
3. Press
‘
to move through all the subheadings in User
Preferences.