Nortel Compact ICS 7.1, Coordinator Manual

Page: 225 / 266

Using System features / 225
N0130955 01 Compact ICS 7.1 System Coordinator Guide
The Link signal can be included as part of a longer stored sequence on an
external autodial button or in a speed dial code. The Link symbol (
¤
) uses
two of the 24 spaces in a dialing sequence.
Preventing a telephone from using Link
Link can be restricted at individual telephones.
1. Place the programming template over the appropriate buttons of the
programming telephone.
2. Press
≤••¤flfl‹››
.
3. Press
¤‹fl›fl
(the default System Coordinator password).
4. Press
≠
and enter the internal number of the telephone you
want to program.
5. Press
≠
.
6. Press
‘
three times. The display shows
Restrictions
.
7. Press
≠
twice.
8. Press
‘
three times. The display shows
Allow link:
.
9. Press
CHANGE
to choose
Y
(Yes) or
N
(No).
Pause
≤‡°
The Pause feature enters a 1.5-second delay in a dialing sequence on an
external line. This is often required for signaling remote devices, such as
answering machines, or when reaching through to PBX features or host
systems.
You can program more than one pause in an external autodial or speed dial
sequence.
The Pause symbol (
›
) uses one of the 24 spaces in a dialing sequence.
Tip -
If your Norstar system is connected to a private
branch exchange (PBX), program Link onto a memory
button for one-touch access.