Nortel Compact ICS 7.1, Coordinator Manual

Page: 50 / 266

50 / Answering calls
Compact ICS 7.1 System Coordinator Guide N0130955 01
10. Press the
KIM
softkey for the KIM for which you want to program
buttons.
If no KIM softkeys appear, it means the KIM was not configured as a
CAP in programming.
11. Press
‘
until you find the button you want to program.
12. Press
TEL#
to enter an autodial number or Hunt group DN or press
FEATR
to enter a feature code and feature programming. To make the
button blank, press
CLR
.
Monitoring telephones from the CAP
The indicator icons beside the buttons on the CAP show the status of
system telephones or lines that are configured on the CAP. Refer to ‘‘What
line indicators mean’’ on page 42 icons.
Release button
Pressing
®
ends a call. You do not have to put the handset down.
®
also ends feature programming.
While you are on a call, do not press
®
to end a feature you are using. If
you do, you disconnect the call. Use
≤
instead.
Hearing aid compatibility
The handsets on all Norstar and BST telephones are compatible with
hearing aids as defined in the FCC rules, Part 68, section 68.316. Not all
hearing aids are optimized for use with a telephone.
Viewing information about a call on the
display
If you subscribe to Call Display services from your local telephone
company, one line of information about an external caller is displayed after
you answer. Depending on the setting and the external information
available, either the caller's name or telephone number is displayed.
When you transfer an external call to another Norstar user, this information
is displayed on the recipient's telephone.