Nortel BSR252 Configuration - Basics Download Page 89

Page: 89 / 460

Chapter 5 System screens

Nortel Business Secure Router 252 Configuration — Basics

Predefined NTP time server list

The Business Secure Router uses the predefined list of NTP time servers listed in

Table 11

if you do not specify a time server or if it cannot synchronize with the

time server you specified.

The Business Secure Router can use this predefined list of time servers regardless
of the Time Protocol you select.

Client User Setting

The client user is the person who uses the Business Secure

Router's Contivity Client VPN tunnel.
The client user can do the following:
•

Configure the

WAN ISP

and

screens.

•

Configure the VPN Contivity Client settings (except the

Advanced

screen exclusive use mode for client tunnel and

MAC address allowed settings).

•

View the SA monitor.

•

Configure the

VPN Global Setting

screen.

•

View logs.

•

View the

Maintenance Status

screen.

•

Use the

Maintenance F/W Upload

and

Restart

screens.

User Name

Type a username for the client user (up to 31 characters).

New Password

Type a password for the client user (up to 31 characters). Note

that as you type a password, the screen displays a (*) for each

character you type.

Retype to Confirm

Retype the client user password for confirmation.

Apply

Click

Apply

to save your changes to the Business Secure

Router.

Reset

Click

Reset

to begin configuring this screen afresh.

Table 10

Password

Label

Description

Summary of Contents for BSR252













































































































































































































































































































































































































































































Search results

Summary of Contents for BSR252

Reviews:

Related manuals for BSR252

Brands by name

Popular brands

Nortel BSR252, Configuration - Basics

Search results

Summary of Contents for BSR252

Reviews:

Related manuals for BSR252

Brands by name

Popular brands