manualshive.com logo in svg

Nortel Attendant PC, Software User'S Manual

Share
Download
Nortel Attendant PC Software User'S Manual Download Page 164

Page 150 of 160

List of terms

P0891256

Standard 2.00

February 1999

Fully Restricted

A call from a fully restricted extension. A person using this 
extension can place calls to and receive calls from other 
extensions and the attendant, but is denied access to all incoming 
and outgoing trunk lines. Incoming calls for a fully restricted 
extension come to the attendant, who then extends them.

FX

Foreign Exchange, type of trunk. “fx” is the label on an ICI key 
which receives calls from Foreign Exchange trunks.

ICI

Incoming Call Indicator. A key on the Attendant PC interface unit 
that flashes to inform the attendant that an incoming call on a 
particular trunk is waiting to be answered. An ICI “key” indicates 
the first call; later calls light up the message waiting indication until 
the first call is released.

May also refer to the light that identifies the type of call coming to 
your console (ICI), such as internal external, WATS, tie trunk, 
emergency, and so on. All incoming calls are queued 
automatically in the order of arrival, and the appropriate ICI 
indicators go on. You can click on a flashing ICI light to answer the 
call associated with it. Set up your ICI keys from the ICI keys page 
on the Config Console menu.

Incoming Call Indicator

See 

ICI.

Intercept

The call that activates this button may be from a caller who dialed 
the access code for a busy trunk group, or from a caller 
encountering equipment or dialing irregularities, such as a caller 
who dialed an extension in Do-Not- Disturb mode. Finally, this call 
may be from a restricted or semi-restricted extension attempting 
to make a call that is not allowed.

Interpositional Call

Interpositional Call. This ICI key indicates an incoming call from 
another attendant at your location.

Summary of Contents for Attendant PC

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands