manualshive.com logo in svg

Nortel Attendant PC, Software User'S Manual

Share
Download
Nortel Attendant PC Software User'S Manual Download Page 113

Meridian 1 Attendant PC call processing

Page 99 of 160

 Meridian 1 Attendant PC Software User Guide

Call Forward/Hunt Override

1

Dial the FFC for Call Forward/Hunt Override and the DN of 
the wanted party.

If the telephone is idle, the telephone is rung 

If the telephone(s) have displays, the display(s) are 
updated.

If the display on the originating telephone is updated when 
the call is answered, the Call Forward/Hunt Override FFC 
will no longer be displayed.

If the dialed telephone is busy and Hunt is active, the calling 
party will terminate on the wanted telephone and will 
receive a busy signal.

If the dialed telephone is idle, but does not answer within 
the defined number of ringing cycles for Call Forward No 
Answer, the call is not forwarded (that is, it continues to 
ring).

If the dialed telephone is busy, the attendant can activate 
Camp-On, if Camp-On is applicable. In addition, Ring Again 
can be placed against a telephone for which Call 
Forward/Hunt Override was used and a busy telephone 
was encountered.

Summary of Contents for Attendant PC

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands