manualshive.com logo in svg

Nortel Attendant PC, Software User'S Manual

Share
Download
Nortel Attendant PC Software User'S Manual Download Page 119

Meridian 1 Attendant PC features

Page 105 of 160

 Meridian 1 Attendant PC Software User Guide

Attendant Break-in Busy indication and prevention

If an attendant, during a break-in operation, dials a busy 
extension, the Attendant Console display provides one of the 
following customer-defined indications:

— three dashes, appended to the end of a digit display (if the busy 

station is involved in an external call), or

— a mode-digit, appended to the end of a digit display.

The operator can click on the break-in key either before or after 
dialing the destination DN. Break-In operates slightly differently in 
these two situations.

Attendant Monitor: Monitoring a DN

The Attendant Monitor feature provides modifications to the Busy 
Verify and Barge-In features.

1 Click on an idle loop key. The loop indicator is lit.

2 Click on Busy Verify in the Feature List. The Busy Verify lamp is lit.

3 Click on Busy Verify again to enable Attendant Monitor. The Busy 
Verify lamp is in the flashing state indicating that the Attendant Monitor 
option is enabled.

4 Dial the extension to be monitored. Attendant Monitor is blocked when: 

—

the extension is busy or maintenance disabled.

—

the extension is vacant.

—

the extension is in some transient state (e.g., Conference or 
Transfer)

—

the extension is idle, receiving busy tone, or receiving overflow 
tone

—

the extension is involved with another attendant

Summary of Contents for Attendant PC

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands