Nortel 2526T, Configuration

Page: 96 / 228

96 Configuring Security using the CLI
The syntax for the
no eapol multihost
command is:
no eapol multihost { [allow-non-eap-enable] [auto-non-eap-mhs
a-enable] [radius-non-eap-enable] [use-radius-assigned-vlan]
[non-eap-pwd-fmt {[ip-addr] [mac-addr] [port-number]}]}
"no eapol multihost parameters" (page 96) describes the parameters and
variables for the
no eapol multihost
command.
no eapol multihost command parameters and variables
Parameters and variables Description
allow-non-eap-enable
Disables control of non-EAP clients
(MAC addresses)
auto-non-eap-mhsa-enable
Disables auto-authentication of
non-EAP clients in MHSA mode
radius-non-eap-enable Disables Radius authentication of
non-EAP clients
use-radius-assigned-vlan Allows use of Radius-assigned VLAN
value
non-eap-pwd-fmt { [ip-addr]
[mac-addr] [portnumber] }
Clears bits from RADIUS non-EAPOL
password format
default eapol multihost command The
default eapol multihost
command sets the EAPoL multihost feature to default.
This command is executed in the global configuration mode.
The syntax for the
default eapol multihost
command is:
default eapol multihost { [allow-non-eap-enable]
[auto-non-eap-mhsa-enable] [radius-non-eap-enable]
[use-radius-assigned-vlan] [non-eap-pwd-fmt {[ip-addr]
[mac-addr] [port-number]}] }
"default eapol multihost parameters" (page 96) describes the parameters
and variables for the
default eapol multihost
command.
default eapol multihost command parameters and variables
Parameters and variables Description
allow-non-eap-enable
Resets control of non-EAP clients
(MAC addresses)
auto-non-eap-mhsa-enable Disables auto-authentication of
non-EAP clients in MHSA mode
radius-non-eap-enable Disables Radius authentication of
non-EAP clients
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.