Securing your system
61
no snmp-server authentication-trap command
The
no snmp-server authentication-trap
command disables the
generation of SNMP authentication failure traps. The syntax for the
no
snmp-server authentication-trap
command is:
no snmp-server authentication-trap
The
no snmp-server authentication-trap
command is executed in
the Global Configuration command mode.
The
no snmp-server authentication-trap
command has no
parameters or variables.
default snmp-server authentication-trap command
The
default snmp-server authentication-trap
command
restores SNMP authentication trap configuration to the default settings.
The syntax for the
default snmp-server authentication-trap
command is:
default snmp-server authentication-trap
The
default snmp-server authentication-trap
command is
executed in the Global Configuration command mode.
The
default snmp-server authentication-trap
command has
no parameters or variables.
snmp-server community for read/write command
The
snmp-server community
command for read/write modifies the
community strings for SNMP v1 and SNMPv2c access. The syntax for the
snmp-server community
for read/write command is:
snmp-server community <community-string> [ro|rw]
The
snmp-server community
read/write command is executed in the
Global Configuration command mode.
This command configures a single read-only or a single read/write
community. A community configured using this command has no access to
any of the SNMPv3 MIBs.
This command affects community strings created prior to Release 3.0
software. These community strings have a fixed MIB view.
Table 18 "snmp-server community for read/write command parameters
and variables" (page 62)
describes the parameters and variables for the
snmp-server community
for read/write command.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
