94
Configuring Security using the CLI
The syntax for the
default eapol guest-vlan
command is:
default eapol guest-vlan
The
default eapol guest-vlan
command is executed in the Global
Configuration command mode and Interface Configuration command mode.
The
default eapol guest-vlan
command has no parameters or
variables.
show eapol guest-vlan command
The show
eapol guest-vlan
command displays the current guest VLAN
configuration.
The syntax for the
show eapol guest-vlan
command is:
show eapol guest-vlan
The
show eapol guest-vlan
command is executed in the Global
Configuration command mode and Interface Configuration command mode.
The
show eapol guest-vlan
command has no parameters or variables.
Figure 14 "show eapol guest-vlan command output" (page 94)
displays
sample output from the
eapol guest-vlan
command.
Figure 14
show eapol guest-vlan command output
Configuring advanced EAPOL features
Ethernet Routing Switch 2500 Series, Software Release 4.1 supports
advanced EAPOL features that allow multiple hosts and non-EAPOL clients
on a port.
This section provides information about configuring the following features:
•
Multiple Host with Multiple Authentication (MHMA) (see
"Configuring
multihost support" (page 95)
)
•
Non-EAPOL hosts on EAPOL-enabled ports (see
"Configuring support
for non-EAPOL hosts on EAPOL-enabled ports" (page 102)
)
•
Multiple Host with Single Authentication (MHSA) (see
"Configuring
MultiHost Single-Autentication (MHSA)" (page 107)
)
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
