86
Configuring Security using the CLI
Table 45
mac-security command for a single port parameters and variables
Parameters and variables
Description
port <portlist>
Enter the port numbers.
disable|enable|learnin
g
Directs the specific port:
•
disable
— disables BaySecure on the
specified port and removes the port from
the list of ports for which MAC address
learning is performed
•
enable
— enables BaySecure on the
specified port and removes the port from
the list of ports for which MAC address
learning is performed
•
learning
— disables BaySecure on the
specified port and adds these port to the list
of ports for which MAC address learning is
performed
mac-security mac-da-filter command
With the
mac-security mac-da-filter
command, you can filter
packets from up to 10 specified MAC DAs. You also can use this command
to delete such a filter and then receive packets from the specified MAC DA.
The syntax for the
mac-security mac-da-filter
command is:
mac-security mac-da-filter {add|delete}<H.H.H.>
The
mac-security mac-da-filter
command is executed in the Global
Configuration command mode.
Table 46 "mac-security mac-da-filter command parameters and values"
(page 86)
describes the parameters and variables for the
mac-security
mac-da-filter
command.
Table 46
mac-security mac-da-filter command parameters and values
Parameters and variables
Description
{add|delete} <H.H.H>
Add or delete the specified MAC address; enter
the MAC address in the form of H.H.H.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
