Nortel 2526T, Configuration

Page: 141 / 228

Configuring Security using Device Manager 141
Field Description
BackendOtherRequestsTo
Supplicant Counts the number of times that the state
machine sends an EAP-Request packet,
other than an Identity, Notification, Failure
or Success message, to the Supplicant.
Indicates that the Authenticator chooses an
EAP-method.
BackendNonNakResponses
FromSupplicant Counts the number of times that the state
machine receives a response from the
Supplicant to an initial EAP-Request, and the
response is something other than EAP-NAK.
Indicates that the Supplicant can respond to the
EAP-method that the Authenticator chooses.
BackendAuthSuccesses Counts the number of times that the state
machine receives an EAP-Success message
from the Authentication Server. Indicates that
the Supplicant has successfully authenticated
to the Authentication Server.
BackendAuthFails Counts the number of times that the state
machine receives an EAP-Failure message
from the Authentication Server. Indicates that
the Supplicant has not authenticated to the
Authentication Server.
Configuring SNMP
This section contains the following topics:
•
"SNMP tab" (page 141)
• "Trap Receivers tab" (page 142)
•
"Graphing SNMP statistics" (page 144)
SNMP tab
The SNMP tab provides read-only information about the addresses that the
agent software uses to identify the switch.
To open the SNMP tab, use the following procedure:
Step Action
1 Select the chassis.
2 Choose Edit > Chassis.
The Chassis dialog box appears with the System tab displayed.
3
Click the SNMP tab.
The SNMP tab appears.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.