Securing your network
107
show eapol multihost non-eap-mac interface [<portlist>]
where
<portlist>
is the list of ports you want to view. You can enter a single
port, a range of ports, several ranges, or all. If you do not specify a port
parameter, the command displays all ports.
The display lists the ports and the associated allowed MAC addresses.
Viewing current non-EAPOL host activity
To view information about
non-EAPOL hosts currently active on the switch, use the following command
in Privileged EXEC, Global configuration, or Interface configuration mode:
show eapol multihost non-eap-mac status [<portlist>]
where
<portlist>
is the list of ports you want to view. You can enter a single
port, a range of ports, several ranges, or all. If you do not specify a port
parameter, the command displays all ports.
show eapol multihost status command
The
show eapol multihost
status
command displays the multihost status of eapol clients on
EAPOL-enabled ports.
The syntax for the
show eapol multihost status
command is:
show eapol multihost status [<interface-type>] [<interface-i
d>]
"show eapol multihost status command parameters and variables" (page
107)"show eapol multihost status command parameters and variables"
(page 107)
describes the parameters and variables for the
show eapol
multihost status
command.
show eapol multihost status command parameters and variables
Parameter
Description
interface-id
Displays the interface ID
interface-type
Displays the type of interface used
The
show eapol multihost status
command is executed in the
Privileged EXEC command mode.
Configuring MultiHost Single-Autentication (MHSA)
To configure
MHSA support, do the following:
1. Enable MHSA globally on the switch (see
"Globally enabling support for
MHSA" (page 108)
).
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
