Configuring SNMPv3
207
Item and MIB
association
Range
Description
Notify Tag(snmp
NotifyTag)
1..32
Type a value to use
to select entries in the
snmpTargetAddrTable. Any entry
in the snmpTargetAddrTable
which contains a tag value which
is equal to the value of an instance
of this object is selected. If this
object carries a zero length, no
entries are selected
Notify Type(snmp
NotifyType)
(1) Trap
(2) Inform
Choose the type of notification to
generate.
Entry Storage(snmp
NotifyStorageType)
(1) Volatile
(2) Non-Vol
atile
Choose your storage preference.
Selecting Volatile requests
information to be dropped (lost)
when you turn off the power.
Selecting Non-Volatile requests
information to be saved in NVRAM
when you turn off the power.
2
In the Notification Creation section, type the required information
in the text boxes or select from a list.
3
Click Submit.
The new entry is displayed in the Notification Table
"Notification
page" (page 206)
.
—End—
ATTENTION
This Notification Table section of the Notification page contains hyperlinks to
the Target Parameter page.
Deleting an SNMPv3 system notification configuration
To delete an SNMPv3 notification configuration, use the following procedure:
Step
Action
1
From the main menu, choose Configuration > SNMPv3 >
Notification.
The Notification page appears (
"Notification page" (page 206)
).
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
